This contour tape has been manufactured to meet European ECE04 Class C specifications. The strong adhesive backing ensures a secure application to rigid sided vehicles. From July 2011 contour marking is compulsory for new types/models of trucks (for which the manufacturer requests approval) with a maximum tonnage over 7.5 tons and for trailers with a tonnage of more than 3.5 tons.

The full rear contour must be marked if the vehicle is broader than 2.1 m. Rear marking is possible in the colours red and yellow. At least one line covering 80% of the total length must be applied to the lower side of the vehicle. If the vehicle is longer than 6m, the top corners must also be marked. Permitted colours for side markings are white and yellow. It is also permitted to mark the full contour of the side. If the side of the vehicle has a reflective graphic, full contour marking is compulsory

Line marking is permitted if the structure of the vehicle makes it impossible to apply full or partial contour marking according to the relevant requirements. Red or yellow are permitted as colours for the line marking at the rear. White or yellow may be used for the sides. The new legislation applies from July 2011 for all new registrations of the aforementioned vehicle category

Miscellaneous Products / Materials

Any product outside of our standard choice of material/size range starts with a 5. This may include items such as rolls of tape, sign frames, floor graphics or banners. Below you can find a more detailed description of the miscellaneous material options available for this sign design.

An all acrylic material for strength and durability